Perth Irrigation - Retic Fittings , Plumbing Fittings, Reticulation Supplies, Western Australia

Irrigation and Plumbing Supplies

RAIN BIRD VALVES

Rain Bird Valves   Valve Installation Tips
RAIN-BIRD_HV_Series_Valve_25mm RAIN-BIRD_PGA_Series_Valves
HV Series Valve PGA Series Valve

Standard Control (SC) & Flow Control (FC)

Reliability

• Eccentric diaphragm for smooth closing, less water hammer

• Glass-filled polypropylene body for strength

• Reverse flow normally closed design

• Single-filtered pilot flow for maximum

 reliability

• Trouble-free service with few parts

• Buna-N diaphragm with self-cleaning 90-mesh (200 micron) pilot water filter and stainless steel spring

Versatility

• Compact design, 2.54" spin radius for tight installations

• Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream

• Available in multiple fitting types

• External bleed to manually flush system
of dirt and debris during installation and
system start-up

• Internal bleed for spray-free
manual operation

• Unique, easy-to-turn, pressureassisted flow control mechanism (HVF models only)

• Captive multi-drive screws for easier maintenance

• Your choice of tools to open valve (nut driver, Phillips head screwdriver, slotted head screwdriver)

• Quick access to diaphragm with only four screws

• Diaphragm locating post for reliable service

A_Specs Sheet HV Series Valve

A_Installation Manual HV Series Valve

 

Features

• Globe and angle configuration for
flexibility in design and installation

• PVC and glass reinforced nylon
construction

• Filtered pilot flow to resist debris and
clogging of solenoid ports

• Slow closing to prevent water hammer and
subsequent system damage

• Manual internal bleed operates the valve
without allowing water into the valve box

• One-piece solenoid design with captured
plunger and spring for easy servicing

• Non-rising flow control handle adjusts
water flows as needed

• Accepts latching solenoid for use with
Rain Bird battery-operated controllers up
to 150 psi (10.35 bar)

• Pressure: 15 to 150 psi (1.04 to 10.35 bar)

• Flow: 0.45 to 34.05 m3/h; 7.8 to 568 l/m)

• Water Temperature: up to 110° F (43° C)

• Ambient Temperature: up to 125° F (52° C)

Electrical Specifications

• Power: 24 VAC 50/60 Hz (cycles/sec)
solenoid

Inrush current: 0.41 A (9.84 VA) at 60 Hz

• Holding current : 0.14A (3.43 VA) at 60 Hz

• Coil resistance: 30-39 Ohm

 


B_Specs Sheet PGA Series Valve

B_Installation Manual PGA Series Valve

B_Troubleshooting PGA 

 
Item Price Min. QTY  

25mm HV Valve I100HV BSP - without Flow Control

$21.00 + GST
 

25mm HV Valve I100HVF BSP - with Flow Control

$21.00 + GST
 

40mm I150PGA Valve Globe/Angle Configuration

$67.90 + GST
 

50mm I200PGA Valve Globe/Angle Configuration

$84.11 + GST