Relief and Regulating Valves
1. Dripline Air/ Vacuum Relief Valve - Product Specification
2. Anka/Apex Air Release Valve - Product Specification
3. Valve Nelson Pressure Relief ACV200 - Product Specification
ALDERDICE VERTICAL CHECK VALVE
Alderdice Vertical Check Valves are made of Gunmetal Bronze and manufactured in Australia. They're designed for use in pumping systems to hold prime and prevent back flow.
 |
Brass Ball Valves - Lockable Handle
Brass Ball Valves are generally used in residential and light commercial applications and are suitable for both hot and cold water, compressed air and most non-corrosive fluids and hydrocarbons including diesel. These particular ball valves are lockable on and off.
Ball Valve - Brass With Stainless Steel Handle
Brass Ball Valves are generally used in residential and light commercial applications and are suitable for both hot and cold water, compressed air and most non-corrosive fluids and hydrocarbons including diesel.
Pressure Rating: 2500kPa/ 355psi
Temperature Range 10 - 120 Degrees Celsius
Can Be Used With Diesel Applications
Mini Ball Valves
Chrome plated mini all valves available in both female x female and male x female varieties
PVC Mini Ball Valve
Every Valve is Factory Tested
Pressure to 150 PSI (1000) KPA
Non UV Stabilised
Philmac Ball Valve
The toughest plastic ball valves on the market, with an easy-to-turn handle.
Features:
- Potable water safe.
- UV-stabilised materials and frost resistant.
- No flow restriction.
Guyco Glass Fibre Reinforced Ball Valves
High Quality Gass Fibre Reinforced Nylon
Strong Non-Corrosive Material, UV Stabilised
Pressure Rating 1600kPa/235 psi
PVC Ball Valves
PVC Ball Valves are versatile high capacity stop valve. These valves have a range of applications, such as, flow and pressure control. PVC Ball V alves hae an on and off function.
Various Colours: White, Grey & Blue
BSP Thread or Socket Joint
Non-UV stabilised
Stainless Steel Ball Valve
Reducing Bore
Maximum Working Temperature: 180 degrees
Cold Working Pressure 6895kPa
Thread: AS1722.1
Applications for: Air, Water, Hot/Cold Corrosive Fluids in harsh environments
Butterfly Valves
Cast iron valve for regulating flow control on larger pipes. Fusion Bonded Epoxy Coated with Stainless Steel Fastners
Dual Check Valve
Used for backflow prevention
WaterMark Certified
Meets AS/NZS 2845.1
Brass Foot Valves
Non-return Valves, prevent backflow in a piping system, allowing water to flow in one direction.
Featuring a wide body for excellent flow with working temperatures 0°C to 120°C and a maximum pressure rating of 1600kPa.
Female BSP Thread
Poly Foot Valves
Glass Fibre Reinforced Nylon
Pressure Rating for Nylon Valve: 1600kPa/ 235 psi
Nylon Foot Valve - Product Specification
Brass Gate Valves
Used for general water applications.
Also suitable for Diesel use.
Pressure Rating: 1600kPa/ 235psi
PVC GATE VALVES
Suitable for low pressure applications, the sliding gate valve allows water flow to be shut off.
Bermad 100 Series Valves
The Bermad 100 series valve is a basic hydraulic valve which uses the hydraulic force of the existing line pressure. It can also utilise any external hydraulic command be it air or water to open and close the valve. This valve is commonly used for on/off applications for agricultural irrigation heads and filter stations.
Manifold Fittings
Manifold fittings provide easy installation and quick disassemly for maintenance of irrigation valves. The swivel fitting with pre-installed o-ring means no thread tape and no tools required - hand tighten only.
Made with reliability, long life and durability in mind.
Product Specifications - 3 and 4 Port Manifolds
Product Specifications - Manifold Fittings
Manifold Fittings
Manifold fittings provide easy installation and quick disassemly for maintenance of irrigation valves. The swivel fitting with pre-installed o-ring means no thread tape and no tools required - hand tighten only.
Made with reliability, long life and durability in mind.
Product Specifications - 3 and 4 Port Manifolds
Product Specifications - Manifold Fittings
Manifold Fittings
Manifold fittings provide easy installation and quick disassemly for maintenance of irrigation valves. The swivel fitting with pre-installed o-ring means no thread tape and no tools required - hand tighten only.
Made with reliability, long life and durability in mind.
Product Specifications - 3 and 4 Port Manifolds
Product Specifications - Manifold Fittings
Glass Fibre Reinforced Non-Return Valves/ Check Valves
Allow water to travel in one direction only.
Pressure Rating 1600kPa/235 psi
Manufactured from High Quality Glass Fibre Reinforced Nylon
Bermad PRV Adjustable Pressure Regulating Valve
Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.
NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.
A. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 50 kpa to 120 kpa.
B. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 100 kpa to 200 kpa.
C. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 150 kpa to 350 kpa.
D. 25mm (1”) female BSP thread inlet & outlet.
Adjustable pressure regulation between 300 kpa to 550 kpa.
Netafim PRV Pressure Regulating Valve
Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.
NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.
A. Netafim Inline PRV Series (#31000-001200)
20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
Max inlet pressure: 1000 kPa.
Flow rate: 0.94 to 16.6 litres per minute.
B. Netafim PRV 2000 Series. (#30500-001600)
20mm (3/4”) female BSP thread inlet. 20mm (3/4”) male BSP thread outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
Max inlet pressure: 1000 kPa.
Flow rate: 13.2 to 66.6 litres per minute.
Toro Pressure Regulating Valve 20mm (3/4" BSP)
Pressure regulating valves are used to limit the pressure of water flowing through the valve. Pressure regulating valves reduce incoming pressure to a set value. They’re typically installed in systems where too much pressure downstream will cause undesired effects, such as low density poly pipe bursting, or sprinklers outputting too much water.
NOTE: To reduce pressure upstream (for example to protect a pump) take a look at our range of pressure relief valves.
A. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 15 PSI (104 kpa).
B. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 30 PSI (208 kpa).
C. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 35 PSI (242 kpa).
D. 20mm (3/4”) female BSP thread inlet & outlet.
Regulates/reduces pressure to 40 PSI (276 kpa).
Bermad Quick Action Adjustable Pressure Relief Valve
Product Specifications: Pilot Valve (included in Pressure Relief Valve)
Product Specifications: Pressure Relief Setup
Pressure relief valves open when the pressure in a system exceeds a set value, releasing water and lowering the pressure in the main line. They provide fast and effective pressure relief to prevent pump damage and equipment failure.
Contact us to special order pressure sustaining and pressure reducing setups from Bermad.
A. 25mm (1”) female BSP thread inlet & outlet.
Adjustable between 100 kpa to 700 kpa.
B. 40mm (1 1/2”) female BSP thread inlet & outlet.
Adjustable between 100 kpa to 700 kpa.
Nelson 1000 Series Pressure Relief Valve
Pressure relief valves open when the pressure in a system exceeds a set value, releasing water and lowering the pressure in the main line. They provide fast and effective pressure relief to prevent pump damage and equipment failure.
50mm (2”) female BSP thread inlet & outlet.
Watts Adjustable Pressure Relief Valves
Product Specifications
Installation Guide
Pressure relief valves open when the pressure in a system exceeds a set value, releasing water and lowering the pressure in the main line. They provide fast and effective pressure relief to prevent pump damage and equipment failure.
A. 15mm (1/2”) female BSP thread inlet & outlet.
Adjustable between 345 kpa to 1200 kpa.
B. 20mm (3/4”) female BSP thread inlet. 15mm (1/2”) female BSP thread outlet.
Adjustable between 345 kpa to 1200 kpa.
C. 20mm (3/4”) female BSP thread inlet. 15mm (1/2”) female BSP thread outlet.
Adjustable between 689 kpa to 2067 kpa.
Bermad Solenoid Valves
Bermad 200 Series Plastic Hydraulic Electric Control Valve Flow Control
Globe Valve With 24 VAC Actuator
For solenoid valve coils click here
Hunter PGV Series
Professional Grade Valves
For solenoid valve coils click here
PGV Valve - Product Specification
Jar Top Valve - Product Specification
Rain Bird DV/DVF/PGA Solenoid Valves
The Rain Bird solenoid valves provide reliability and versatility with their many features; smooth closing diaphram for less water hammer, made with a glass-filled polypropylene body for strength, compact design with filtered pilot flow to resist debris and clogging of the solenoid internal parts.
Richdel - Irritrol Series Valves
Standard Control (SC) and Flow Control (FC)
Richdel 2400 MT/F Series - Product Specification
Richdel 204/5 Series - Product Specification
Richdel FC 25 (IV25FC) - Product Specification
25mm Watermarked Solenoid Valve
Solenoid control valve with high flow and low pressure loss for use in drip, spray, and pop up sprinkler watering systems. Valve has been designed to utilise a minimum number of internal parts to ensure reliability and cost effectiveness. Features: Body material/outer casing natural Nylon 66 30% glass filled and Stainless steel plunger with natural Nitrile elastomer tip and diaphragm.
Brass Inline Spring Check Valve
Brass inline spring check valves are commonly used to prevent backflow contamination for through pressure pipes in a variety of applications. A possible application where a brass inline spring check valve could be used is where there is a tank system linked with mains water that must be prevented from becoming contaminated. Brass inline spring check valves are suitable to both residential and industrial applications
Brass Swing Check Valves
Used for tanks systems to prevent backflow contamination.
All Valves are rated for 1600kPa / 235psi pressure rating
PVC Swing Check Valve
Non-metal check valve used in systems for backflow prevention.
Maximum opening pressure less than 4kPa
Maximum pressure at 23°C:
Full flow (open) – 1034 kPa
Back pressure (closed) – 517 kPa
- Engineered to maximize flow, responsiveness and for positive shut-off
- Compact, space saving design
- Body constructed from PVC
- High grade EPDM seat
- No metal parts
- Excellent for Pool and Spa and general purpose irrigation use
- Suitable for horizontal and vertical up flow installations
- Angled seat and weighted flapper for low-pressure seal
- Slip x Slip socket connections
Valve Boxes
Valve boxes are commonly used as covers for solenoid valves and other items
A valve box provides a cover for ground level items
Brass Y Strainer Valves
Maximum operating temperature 0°C - 99°C
Working pressure 2000kPa
Mesh Size: 15MM-25MM 350 Micron
Watermarked
Manufactured and tested in accordance with AS3688
SS304 Filter
Relief and Regulating Valves
1. Dripline Air/ Vacuum Relief Valve - Product Specification
2. Anka/Apex Air Release Valve - Product Specification
3. Valve Nelson Pressure Relief ACV200 - Product Specification
Brass Foot Valves
Non-return Valves, prevent backflow in a piping system, allowing water to flow in one direction.
Featuring a wide body for excellent flow with working temperatures 0°C to 120°C and a maximum pressure rating of 1600kPa.
Female BSP Thread
Poly Foot Valves
Glass Fibre Reinforced Nylon
Pressure Rating for Nylon Valve: 1600kPa/ 235 psi
Nylon Foot Valve - Product Specification
Relief and Regulating Valves
1. Dripline Air/ Vacuum Relief Valve - Product Specification
2. Anka/Apex Air Release Valve - Product Specification
3. Valve Nelson Pressure Relief ACV200 - Product Specification