HUNTER HYDRAWISE HC FLOW METERS 20–50MM BSP

Hunter Hydrawise HC Flow Meters are flow sensors used with compatible Hydrawise-enabled Hunter controllers to monitor irrigation water use, station-level flow rates and system flow conditions. They are a practical addition to smart irrigation systems where customers want better visibility over water use, flow faults and system performance.

Available in 20mm, 25mm, 40mm and 50mm male BSP models, the HC Flow Meter range suits a variety of residential and commercial irrigation systems. When configured in Hydrawise®, the flow meter can report total system water use, individual station water use, and flow rates for more accurate water budgeting and tracking.

Hydrawise® can send alerts for high-flow, low-flow or unscheduled flow conditions, helping identify possible leaks, broken pipes, stuck valves or other irrigation issues. Each flow meter features robust brass construction, union fittings for easier installation and removal, and an analogue dial on the face of the meter for manual flow reading.

HC Flow Meters are installed in the mainline between the master valve and zone valves. They must be installed horizontally with the dial facing up, in the correct flow direction, and with suitable straight pipe lengths before and after the meter. Wired installations require dedicated shielded direct-burial cable, with an optional Wireless HC Flow Meter Kit available where running cable is difficult.

2 Year Hunter Warranty

Hunter HC Flow Meter Brochure
Hunter HC Flow Meter Installation Guide
Hunter HC Flow Meter Specifications