Poly Compression Metric Elbow Poly x FI BSP
Poly Compression Metric Elbow Poly x FI is a 90° elbow compression fitting with a female BSP thread for metric HDPE poly pipe. The compression end of the fitting joins to the pipe via a nut assembly. Made of lightweight high-performance thermoplastic materials, rated for up to 1600kpa pressure. Safe for use with water for human consumption. Designed to withstand the toughest Australian conditions with UV, chemical, and corrosion resistance. Non-toxic, taint-free and impact-proof. Philmac compression fittings have a design life of over 50 years.
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
- Sizes 32mm and larger have stainless steel collars.
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Compression Metric Elbow Poly x Poly
Poly Compression Metric Elbow Poly x Poly is a 90° elbow compression fitting for metric HDPE poly pipe. Each end of the fitting joins to the pipe via a nut assembly. Made of lightweight high-performance thermoplastic materials, rated for up to 1600kpa pressure. Safe for use with water for human consumption. Designed to withstand the toughest Australian conditions with UV, chemical, and corrosion resistance. Non-toxic, taint-free and impact-proof. Philmac compression fittings have a design life of over 50 years.
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Metric End Cap
Commonly used to block off the end of a metric PE pipe
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, NS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
All fittings unless otherwise stated are Philmac/Plasson fittings
Poly Compression Metric End Connector Poly X FI BSP
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
- Sizes 1 1/4" and larger have stainless steel collars.
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Compression Metric End Connector Poly x MI BSP
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Metric Flanged Adaptor
Poly x Flange - Metal (AS2129 Table E)
Complies with ISO 142936, AS/NZS 4129, ISO 711, BS 21, DIN 299, UNI 9561, NEN 3258, AS1722, DIN 8026
Will withstand sub zero temperatures and has a water rating of PN16, the flange has four holes
All fittings unless otherwise stated are Philmac/Plasson fittings
Poly Compression Metric Joiner Poly x Poly
Poly Compression Metric Joiner Poly x Poly is a compression fitting used to join two lengths of metric HDPE poly pipe. Each end of the fitting joins to the pipe via a nut assembly. Made of lightweight high-performance thermoplastic materials, rated for up to 1600kpa pressure. Safe for use with water for human consumption. Designed to withstand the toughest Australian conditions with UV, chemical, and corrosion resistance. Non-toxic, taint-free and impact-proof. Philmac compression fittings have a design life of over 50 years.
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Metric Slip Joiner- Poly x Poly
Commonly used to make a straight connection
between pipes of the same size
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Compression Metric Tee Poly x Poly x FI BSP
Poly Compression Metric Tee Poly x Poly x FI BSP is a tee compression fitting with a female BSP thread for metric HDPE poly pipe. The fitting has two nut assembly ends for joining to metric pipe, and a female BSP thread branching off at 90°. Made of lightweight high-performance thermoplastic materials, rated for up to 1600kpa pressure. Safe for use with water for human consumption. Designed to withstand the toughest Australian conditions with UV, chemical, and corrosion resistance. Non-toxic, taint-free and impact-proof. Philmac compression fittings have a design life of over 50 years.
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
- Sizes 1 1/4" and larger have stainless steel collars.
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Compression Metric Tee Poly x Poly x Poly
Poly Compression Metric Tee Poly x Poly x Poly is a tee compression fitting used to join three lengths of metric HDPE poly pipe. Commonly used to branch a pipe line at 90° from the main line. Each end of the fitting joins to pipe via a nut assembly. Made of lightweight high-performance thermoplastic materials, rated for up to 1600kpa pressure. Safe for use with water for human consumption. Designed to withstand the toughest Australian conditions with UV, chemical, and corrosion resistance. Non-toxic, taint-free and impact-proof. Philmac compression fittings have a design life of over 50 years.
Proudly made in Australia. Philmac compression fittings have a 20 year warranty.
- Sizes 20mm to 63mm belong to Philmac’s 3G metric compression fitting range. Product Brochure & Installation
- Sizes 75mm to 110mm belong to Philmac’s Safelok metric compression fitting range. Product Brochure & Installation
Our metric compression fittings are made to comply with AS/NZS4129, ISO 14236, AS/NZS 4020, BS 5114, and AS 3688. NATA accredited with laboratory number 14673.
Poly Rural Elbow - Poly x Female BSP
Commonly used to make a connection from rural pipe at a 90 degree angle to a male thread. Sizes 1 1/4" and over comes with a Stainless Steel collar. These Poly Elbows are Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural Elbow- Poly x Poly
Commonly used to make a connection at a 90 degree angle between poly pipes of the same
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural End Cap
Commonly used to block off the end of a rural PE pipe
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural End Connectors- Poly x Female BSP
Commonly used to make a straight connection between a male thread and rural poly pipes
Size 1 1/4" and over comes with Stainless Steel collar
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural End Connector- Poly x Male BSP
Commonly used to make a straight connection from a male thread to a metric poly pipe
Size 1 1/4" and over comes with a Stainless Steel collar
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural Telescopic Joiner- Poly x Poly
Commonly used for repair or tapping into rural PE pipe
Australian made UV, impact and corrosion resistant compression fittings made for Australian conditions
Poly Rural Joiner - Poly x Poly
Commonly used to make a straight connection between rural poly pipes of the same size pipe
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural Tee- Poly x Female BSP
Commonly used to make a connection from a female thread take-off to rural poly pipes
Sizes 1 1/4" and over comes with a Stainless Steel collar
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
Poly Rural Tee- Poly x Poly x Poly
Commonly used to make a connection between multiple rural poly pipes of the same size
Australian made UV, impact, and corrosion resistant compression fittings made for Australian conditions
Compliant with AS 4020, AS/NZS 4129, BS 5114, ISO 14236 and NATA accredited with the laboratory number 14673
PVC Tapping Saddles
Single bolt fixing with unique hinged design - 600kPa (top)
2 Bolt Metric Tapping Saddle - 1200kPa (middle)
4 Bolt Tapping Saddle (bottom)
First measurement represents pipe size
For PVC Tapping Saddles, Please Contact Us
** Special Order