Polyethylene Air Pipe (Air Supply Pipe)
Suitable for use in compressed air applications up to 1600kpa pressure.
Used with metric compression fittings.
UV stable, PE100 material.
Complies with AS4130 & AS4131, ISO 9002 certification.
Contact us if you require longer coils of this pipe.
Made in Australia.
Manufacturer's warranty of 50 years.
Polyethylene HDPE Corrugated pipe
Rubber ring joint pipe, light weight & easy to handle. Corrugated pipe for use in stormwater.
Interior wall lining smooth with a corrugated exterior wall.
WaterMark Approved - Level 2
Installation - Gravel Backfill
Installation - Cement Backfill
Also available for DWV & Culvert use- Please contact for more information
Fully compliant with AS/NZS 5065:2005
Made in Australia
DWV Pipe
(Drain, Waste and Vent)
Manufactured in Western Australia by Vinidex, iPlex and PipeMakers
Please contact us for prices outside of WA
All Pipe is manufactured to Australian Standards AS/NZS 1260
PVC Pressure Pipe
Suitable for a wide range of water applications such as water supply, water recycling, irrigation, pressure sewerage and industrial applications
Manufactured in WA by Plascorp, Vinidex, iPlex and PipeMakers
Please contact us for prices outside of WA
AS/NZS1477 Cl 9 - 18
PVC Pressure Pipe
Suitable for a wide range of water applications such as water supply, water recycling, irrigation, pressure sewerage and industrial applications
Manufactured in WA by Vinidex, iPlex and PipeMakers
Please contact us for prices outside of WA
AS/NZS1477 Cl 9 - 18
Slotted Pipe
We offer a pipe slotting service and can slot pipe to fit
most required configurations.
Please Note: For listed products that are not kept in stock and are rarely purchased an additional $35 + GST set up fee will apply. Please contact us if you have any concerns.
Listed below are typical bore and drainage applications.
**ITEMS MARKED WITH ASTERISK ARE NON-STOCK ITEMS
Contact us to confirm minimum order quantity for production.
Slotted Pipe
We offer a pipe slotting service and can slot pipe to fit
most required configurations.
Please Note: For listed products that are not kept in stock and are rarely purchased an additional $35 + GST set up fee will apply. Please contact us if you have any concerns.
Listed below are typical bore and drainage applications.
**ITEMS MARKED WITH ASTERISK ARE NON-STOCK ITEMS
Contact us to confirm minimum order quantity for production.
Stormwater Pipe
Stormwater pipe is often used for drainage of excess rain and ground water. Stormwater pipe is not defined or rated by wall thickness but is rated by stiffness with a minimum SN1.5 rating in accordance with Australian Standard AS1260. 300 mm stormwater has an approximate wall thickness of 4 - 5 mm whilst 375 mm stormwater has an approximate wall thickness of 5 - 6 mm rated to SN1.5
Made in WA by Vinidex, iPlex and PipeMakers
Please contact us for pricing if you are outside WA
All pipes are manufactured to the following standard AS 1260
Stormwater Rectangular Downpipe
Dimensions for 100 x 50 Downpipe: Outside Diameter 105.1mm x 54.3mm
Inside Diameter 101.8mm x 51mm
Wall Thickness 1.65mm